APT Tiling & Waterproofing Supplies
Showing 129–136 of 148 results
EZI Coarse Grout 3.5kg Stone Grey 804
This material is specially made up to the particular characteristic, for grouting narrow tile joints with good workability and performance.
It forms a strong grouting mortar with the following performance:
-Good flexural strength, therefore allowable for retraction and expansion of tile
-Good resistance to shrinkage
-Good resistant to abrasion
-Water resistant but not impervious to water
-Provide smooth and compact finished surface
Coverage: 8-9m2 per bag: > 300×300 tiles
6-7m2 per bag: < 300x300 tiles
Technical Data Sheet: Grout FINE Tech Data
GST is Additional.
EZI Fine Grout 3.5kg Natural Grey 801
This material is specially made up to the particular characteristic, for grouting narrow tile joints with good workability and performance.
It forms a strong grouting mortar with the following performance:
-Good flexural strength, therefore allowable for retraction and expansion of tile
-Good resistance to shrinkage
-Good resistant to abrasion
-water resistant but not impervious to water
-Provide smooth and compact finished surface
Coverage: 8-9m2 per bag: > 300×300 tiles
6-7m2 per bag: < 300x300 tiles
Technical Data Sheet: Grout FINE Tech Data
GST is Additional.
EZI Fine Grout 3.5kg White 800
This material is specially made up to the particular characteristic, for grouting narrow tile joints with good workability and performance.
It forms a strong grouting mortar with the following performance:
-Good flexural strength, therefore allowable for retraction and expansion of tile
-Good resistance to shrinkage
-Good resistant to abrasion
-water resistant but not impervious to water
-Provide smooth and compact finished surface
Coverage: 8-9m2 per bag: > 300×300 tiles
6-7m2 per bag: < 300x300 tiles
Technical Data Sheet: Grout FINE Tech Data
GST is Additional.
EZI Multiplus 4 litres (3.8kg)
Standard Slurry Bonding Coat most suitable for bonding standard cement sand floor screeds or render to smooth or dense concrete, steel surface etc.
Mix 1 part multibond with 1.5 parts cement. Apply screed when this bonding coat is still tacky
Additive for renders and screed for increased water resistance, toughness, flexibility, and reduced drying shrinkage
Standard Primer for use on more absorbent surfaces such as concrete, plasterboard, cement boards, cement renders etc.
Coverage: 30m2/litre
Mix Ratio:
6-7L/ 20kg Tile Adhesive
7-8L/ 25kg Tile Adhesive
Technical Data Sheet:
MultiPLUS Tech Data
EZI SBR Bond 4 litres (3.8kg)
Designed to be applied on substrates to further enhance the adhesion of tile adhesives. Designed to enhance the physical properties of cement screeds and plaster. Improves water resistance and reduces water permeability. Can also be used on building boards, vinyl, plywood or any existing non-absorbent surface and tile directly on top without removing existing flooring (Use neat).
High performance primer/ bonding agent
Patching and repair of concreted Areas. (Use 1:3 Cement: sand mix plus SBR neat allows feather edging)
Solid Plaster Splatter Coat to Block wall (use 1 part SBR:4 parts water and 9 parts plaster slurry)
Plaster Primer(Dilute 1:4 SBR: water) to prime plaster prior to painting
Technical Data Sheet:
SBR Tech Data
Coverage: 30m2/litre (If use As primer)
General Electric Silglaze N10 Neutral Cure Light Grey 310ml (300g)
Suitable for all interior and exterior joints incl metal roofing, ducting, tiles, glass, aluminium, flashings, ceramic, porcelain, stone, granite, marble tiles,
Available in Light Grey or White
V- Tech High Performance Sealant 300ml – Grey
Suitable for all interior and exterior joints incl metal roofing, ducting, tiles, glass, aluminium, flashings, ceramic, porcelain, stone, granite, marble tiles,
Available in Grey or White
11mm Aluminium L angle trims (11 kg) Package order – Bright Silver
11mm Bright Silver L angle tile trim with a High Quality finish, 2.5m long. 50 pieces in a package