APT Tiling & Waterproofing Supplies
Showing 121–128 of 148 results
EZI Starfix Tile Adhesive 20kg
Internal and External use. Performs underwater immersion and colds weather conditions
Suitable for Concrete Floor Substrates
Suitable for Ceramic Floor tiles, brick veneer, terracotta, terrazzo, lower density marble, and granite tiles.(For Higher density granite and marble tiles and adhering on timber framed substrates – use admix 1 admixture)
Suitable for high traffic areas.
Production classification: AS 4992.1 Class C1, ISO 13007-1 Type C Class 1
Classified as C1 type adhesive but has a performance close to a C2 type Adhesive
Technical Data
Tensile Adhesion after 28 days(dry air) : 1.82 N/mm2
Tensile Adhesion after water immersion: 0.78N/mm2
Resistant to heat: +100 degrees Celsius
Resistant to Frost: – 15 degrees Celsius
Open time: 20 minutes.
Classification: C1
Technical Data:
Starfix
Laboratory Test:
Contact Us by Email for the independent lab result for Starfix
Coverage on flat surface: 8mm trowel – 5-6m2 10mm trowel- 4-5m2
12mm trowel – 3-4m2.
Best value adhesive for its purpose in the NZ.
Important Note
Available only on the warehouse storage, minimum order of $100 else $12 picking fee will apply.
EZI Grey Fix 25kg
Internal and External use.
Suitable for Concrete Floor Substrates
Suitable for Ceramic Floor tiles, Brick veneer, terracotta, terrazzo, lower density marble and granite tiles.(For Higher density granite and marble tiles and adhering on timber framed substrates – use admix 1 admixture)
Production classification: AS 4992.1 Class C1, ISO 13007-1 Type C Class 2
Technical Data
Tensile Adhesion after 28 days(dry air) : 1.42 N/mm2
Resistant to heat: +100 degrees Celsius
Resistant to Frost: – 15 degrees Celsius
Open time: 20 minutes.
Classification: C1
Technical Data:
Greyfix
Coverage on flat surface: 8mm trowel – 7-8m2 10mm trowel- 5-6m2
12mm trowel – 4-5m2.
Best value adhesive for its purpose in the NZ.
Premix Render 103 (Screed) 25kg
Ezi PREMIX RENDER 103 is a modified, high-performance cement-sand rendering mortar. It has a fine finish ideal for waterproofing. This can also be used for wall rendering plaster over brick or blocks. Suitable under full water immersion areas like swimming pools
Contents: Portland Cement, Graded & Washed Sharp Silica Sand, and Special Additives.
Thickness: 5mm~15mm(Minimum) in 1 coat
Coverage: 1.3m2/per bag
Technical Data Sheet:
Ezi PREMIX RENDER 103 A
Ezi PREMIX RENDER 103 B
Test Result:
Contact us by Email for Ezi PREMIX RENDER 103 Test Results
EZI Coarse Grout 20 kg Deep Grey 806
Grout
This material is specially made up to the particular characteristic, for grouting narrow tile joints with good workability and performance.
It forms a strong grouting mortar with the following performance:
-Good flexural strength, therefore allowable for retraction and expansion of tile
-Good resistance to shrinkage
-Good resistant to abrasion
-Water resistant but not impervious to water
-Provide smooth and compact finished surface
Coverage: 30m2 per bag: > 300×300 tiles
25m2 per bag: < 300x300 tiles
Technical Data Sheet:
Grout Coarse Tech Data
EZI Coarse Grout 20 kg Stone Grey 804
Grout
This material is specially made up to the particular characteristic, for grouting narrow tile joints with good workability and performance.
It forms a strong grouting mortar with the following performance:
-Good flexural strength, therefore allowable for retraction and expansion of tile
-Good resistance to shrinkage
-Good resistant to abrasion
-Water resistant but not impervious to water
-Provide smooth and compact finished surface
Coverage: 30m2 per bag: > 300×300 tiles
25m2 per bag: < 300x300 tiles
Technical Data Sheet:
Grout Coarse Tech Data
EZI Fine Grout 20 kg Natural Grey
Grout
This material is specially made up to the particular characteristic, for grouting narrow tile joints with good workability and performance.
It forms a strong grouting mortar with the following performance:
-Good flexural strength, therefore allowable for retraction and expansion of tile
-Good resistance to shrinkage
-Good resistant to abrasion
-Water resistant but not impervious to water
-Provide smooth and compact finished surface
Coverage: 30m2 per bag: > 300×300 tiles
25m2 per bag: < 300x300 tiles
Technical Data Sheet:
Grout FINE Tech Data
EZI Fine Grout 20 kg White 800
Grout
This material is specially made up to the particular characteristic, for grouting narrow tile joints with good workability and performance.
It forms a strong grouting mortar with the following performance:
-Good flexural strength, therefore allowable for retraction and expansion of tile
-Good resistance to shrinkage
-Good resistant to abrasion
-Water resistant but not impervious to water
-Provide smooth and compact finished surface
Coverage: 30m2 per bag: > 300×300 tiles
25m2 per bag: < 300x300 tiles
Technical Data Sheet:
Grout FINE Tech Data
EZI Coarse Grout 3.5kg Deep Grey 806
This material is specially made up to the particular characteristic, for grouting narrow tile joints with good workability and performance.
It forms a strong grouting mortar with the following performance:
-Good flexural strength, therefore allowable for retraction and expansion of tile
-Good resistance to shrinkage
-Good resistant to abrasion
-Water resistant but not impervious to water
-Provide smooth and compact finished surface
Coverage: 8-9m2 per bag: > 300×300 tiles
6-7m2 per bag: < 300x300 tiles
Technical Data Sheet: Grout FINE Tech Data
GST is Additional.