Product Description
10mm aluminium Bright Silver Aluminium anodised off angle tile trim 2.5m long.
Back to Tiling Tools & Accessories
10mm TM Aluminium (off angle)Bright Finish trims (220 grams)
$2.90
Best Value : $2.90 per piece. Fax or Email us now to order!
30 in stock
Be the first to review “10mm TM Aluminium (off angle)Bright Finish trims (220 grams)”
You must be logged in to post a comment.
Related Products
General Electric Seal It Right 168 Neutral Cure Light Grey 310ml (300 grams)
This neutral cure silicone is suitable for all internal and external joints to metal roofing, ducting, tiles, glass, aluminium, flashing. ceramic, porcelain, stone, granite, marble tiles, etc.
Available in white and Grey.
EZI Fine Grout 20 kg Natural Grey
Grout
This material is specially made up to the particular characteristic, for grouting narrow tile joints with good workability and performance.
It forms a strong grouting mortar with the following performance:
-Good flexural strength, therefore allowable for retraction and expansion of tile
-Good resistance to shrinkage
-Good resistant to abrasion
-water resistant but not impervious to water
-Provide smooth and compact finished surface
Coverage: 30m2 per bag: > 300×300 tiles
25m2 per bag: < 300x300 tiles
Technical Data Sheet:
Grout FINE Tech Data
EZI Starfix Tile Adhesive 20kg
Internal and External use. Performs under water immersion and colds weather conditions
Suitable for Concrete Floor Substrates
Suitable for Ceramic Floor tiles, Brick veneer, teracotta, terazzo and lower density marble and granite tiles.( For Higher Density granite and Marble tiles and adhering on timber framed substrates – use admix 1 admixture)
Suitable for high traffic areas.
Production classification: AS 4992.1 Class C1, ISO 13007-1 Type C Class 1
Classified as C1 type adhesive but has a performance close to a C2 type Adhesive
Technical Data
Tensile Adhesion after 28 days(dry air) : 1.82 N/mm2
Tensile Adhesion after water immersion: 0.78N/mm2
Resistant to heat: +100 degrees Celsius
Resistant to Frost: – 15 degrees Celsius
Open time: 20 minutes.
Classification : C1
Technical Data:
Starfix
Laboratory Test:
Contact Us by Email for the independent lab result for Starfix
Coverage on flat surface: 8mm trowel – 5-6m2 10mm trowel- 4-5m2
12mm trowel – 3-4m2.
Best value adhesive for its purpose in the NZ.
Important Note
Available only on the warehouse storage, minimum order of $100 else $12 picking fee will apply.
EZI Starflex 2 in 1 White Semi Flexible Tile Adhesive 25kg
Internal and External use incl under water immersion. White is faster setting and more suited over waterproofing, walls and colder weather application.
Suitable for Concrete, tile and slate underlay, gypsum plasterboard Floor and Wall Substrates
Suitable for Ceramic and Fully vitrified porcelain Floor and wall tiles, Brick veneer, teracotta, terazzo, marble, slate ,stone and granite tiles incl over most PU/acrylic/SBR waterproofing membranes.
Great for heavy traffic and Heavy loading areas incl in Swimming Pools
Suitable for Small/Medium format tiles below 600 x 600 for walls.
Flexible with high adhesion strength.
Production classification: AS 4992.1 Class C2, ISO 13007-1 Type C Class 2.
Technical Data
Tensile Adhesion after 28 days(dry air) : 3.63 N/mm2
Tensile Adhesion after water immersion: 3.36 N/mm2
Tensile Adhesion after Heat Aging: 2.66 N/mm2
Resistant to heat: +100 degrees Celsius
Resistant to Frost: – 5 degrees Celsius
Open time: >30 minutes.
Classification : C2
Technical Data:
Starflex 2in1 Part A
Starflex 2in1 Part B
Laboratory test:
Contact Us by email for the independent lab result for Starflex 2 in 1 White
Coverage on flat surface: 8mm trowel – 7-8m2 10mm trowel- 5-6m2
12mm trowel – 4-5m2.
Coverage on flat surface: 8mm trowel – 7-8m2 10mm trowel- 5-6m2
12mm trowel – 4-5m2.
Reviews
There are no reviews yet.